Skip to Content

Category Archives: Corporate

Our seats at IREE 2019 in New Delhi

During 22 to 24 October FAINSA exhibited our seats at IREE 2019 ( Indian Rail Equipment Exhibition) in New Delhi, India.

FAINSA had already supplied First and Standard class seats on the very prestigious Vande Bharat Express Train, the first semi High Speed (max 160km/h) electric train built fully in India. This project was code named “Train 18” because the train was designed and built from scratch in only 18 months by Integral Coach Factory in Chennai.  Here at IREE, we showcased the very same MD seat presented for First Class in Vande Bharat Express. This specification demanded a high degree passenger amenities such a huge recline, power sockets to every single place and a huge table.  The seat even rotated 180 degrees to give a passenger a choice of airline or a bay configuration.

The market is also dramatically growing with new Metro trains.  FAINSA is the incumbent seat supplier to Delhi Metro (DMRC) RS10 project that was one of the largest contracts for Metro style cars in the world.  Here, FAINSA exceed a particular challenge of a fold-up bench along the assembly being fully waterproofed.  This innovation allowed Rotem, the train builder,  to safely and efficiently stow away important electrical equipment.  So during the IREE fair, FAINSA also presented a very similar DMRC RS10 design but this time fitting some newly formed stainless steel shells.  This new innovation certainly indeed created a wealth of interest from different Indian regions.

There was an anticipated 12,000 visitors to the Fair and we certainly did our best to answer every single question that was asked.

0 0 Continuez à Lire →

Nous sommes à BusWorld 2019

Nous vous attendons Hall1, Stand 136C

Un rendez-vous incontournable pour le plaisir de vous recevoir et vous faire découvrir les nouveautés de notre gamme de sièges Bus et Coach.

0 0 Continuez à Lire →

Retrouvez-nous sur RNTP 2019 in Nantes, France

Durant trois jours, cet événement rassemblera 800 congressistes (élus, membres des collectivités territoriales, exploitants, industriels, entrepreneurs, chercheurs, institutionnels et journalistes) et près de 100 intervenants qui se retrouveront pour partager leur vision et bâtir la mobilité de demain.

  • 200 exposants issus de tous les métiers du transport public, ferroviaire, routier et des mobilités actives
  • 16.000 m² de salon
  • 6.000 participants

Les Rencontres permettent aux collectivités de rencontrer des professionnels à même de leur apporter des solutions concrètes en termes de mobilités.

COMPIN, leader européen de l’aménagement intérieur des transports en commun sur rails et sur pneus, interurbains et longues distances est un exposant historique. Au fil des éditions, nous avons vu le secteur des transports publics amorcer les grandes transformations que nous avons nous-mêmes intégrées dans nos offres de produits.

Nous sommes donc très heureux d’accueillir tous nos fidèles et futurs clients à ces rencontres. C’est le lieu idéal pour vous présenter l’ensemble de nos nouveautés, retours d’expérience et solutions à vos attentes.

Retrouvez-nous sur notre stand à l’emplacement : H4-21

0 0 Continuez à Lire →

WELCOME in our NEW FACTORY in POLAND

WELCOME in our NEW FACTORY in POLAND

Our new address:

Compin Polska Sp.z o.o.

Jedrzejowska 79

93-636 Lodz, Poland 

 

After 11 years in the same location, polish site of the group has moved its plant to a brand new building, increasing up to 30 % the capacity of production and 20 % the capacity of storage: additional space to start more new projects, to integrate new technologies and also to improve our process of production by investing in automatization and robotization.

This building represents a great chance for Compin to accelerate its development in Poland for many next years. New working positions are open to help us to build our future: we want to attract the best candidates with talents and skills to support the new coming challenges of our team.

Nevertheless, today, thanks to the new layout and organization, our main target is to improve our performance in term of  efficiency, quality, reactivity for the benefit of our customers.

0 0 Continuez à Lire →

COMPIN FAINSA – EURO BUS EXPO 2018

From 30th October to 1st November, 9,000 visitors from 50 countries made the trip to Eurobus UK this year.

Key points about Eurobus

  • Eurobus UK is a bi-annual event and has steadily grown in importance over the last years.
  • Eurobus is predominately a local exhibition that specifically targets the coach and bus operators.
  • Eurobus displays €25M worth of coaches, over 3 days for potential customer to look, touch and try out.

 

COMPIN FAINSA took the opportunity to present our growing range of Coach products, from high luxury to entry level markets.

The stand was fully loaded with over 14 different products that included some new, competitive seats for the suburban and coach market.

Not only this, the stand included a new bus seat called “Urbanity” that has already led to some great interest in new markets and new customers.

But creating the most interest on the stand, and, the “star of the show” was the Urbanity seat with a heated pad system.  Many operators and builders viewed this innovation with a huge interest and the sales team is following up these “hot” leads!

 

0 0 Continuez à Lire →

COMPIN Ferroviaria in Linares takes care of our environment

COMUNICACIÓN DESEMPEÑO AMBIENTAL

COMPIN FERROVIARIA S.L. es una empresa comprometida con la mejora continua en materia ambiental conforme a las directrices marcadas en nuestra política de Calidad y Medio Ambiente. Prueba de ello es el proceso de implantación y posterior certificación de un sistema de gestión ambiental conforme a los requisitos de la norma ISO 14001:2015 en el que nos encontramos inmersos durante este año 2018, a través del que nos comprometemos a prevenir la contaminación y a proteger el medio ambiente.

En relación con el desempeño ambiental de COMPIN FERROVIARIA S.L. durante el primer semestre de 2018 cabe destacar:

  • Se ha disminuido el consumo de electricidad por m2 de paneles fabricados respecto al año anterior en un 55%.
  • Se ha disminuido el consumo de gasoil por m2 de paneles fabricados respecto al año anterior en un 47%.
  • Se ha disminuido el consumo de agua por m2 de paneles fabricados respecto al año anterior en un 69%.

POLÍTICA DE CALIDAD  Y MEDIO AMBIENTE

El interés principal de COMPIN FERROVIARIA, S.L., sigue dos vertientes. Por un lado, obtener la satisfacción de sus clientes y el cumplimiento con los requisitos definidos y por otro lado, establecer un compromiso de mejora continua y de protección del medio ambiente. Para ello, la empresa, a través de la presente Política de Calidad y Medio Ambiente adquiere los siguientes compromisos:

  • Calidad en los productos suministrados por la organización, asegurándose que los productos que el cliente recibe cumplen todas las especificaciones que éste había previsto y las mantienen a lo largo del tiempo.
  • Mejorar permanentemente la satisfacción de nuestros clientes actuando de una forma más proactiva, anticipándonos a sus deseos en materia de calidad y servicio.
  • Ser una empresa con capacidad para colaborar con nuestros clientes en la innovación de sus productos.
  • Garantizar el tratamiento de los problemas de seguridad del producto, dotando de los medios necesarios para reducir al mínimo los riesgos potenciales para los empleados, clientes y usuarios.
  • Asegurar el cumplimiento tanto de la legislación legal ambiental aplicable a nuestras actividades, productos y servicios, como el de normativas de clientes y cualquier otro requisito legal aplicable.
  • Mejorar la comunicación interna incidiendo especialmente en la comunicación transversal y horizontal y la comunicación externa con nuestros proveedores, clientes y demás partes interesadas.
  • Potenciar la gestión de los recursos humanos, incidiendo en el incremento de la capacidad de las personas para asumir responsabilidades y tomar iniciativas, formando a todo aquel cuya actividad pueda generar un efecto sobre el medio ambiente con el objeto de que conozca el impacto de sus actividades.
  • Minimizar la cantidad de residuos generados y trabajar por la prevención de la contaminación ambiental producida por las emisiones y otros aspectos.
  • Establecer y revisar periódicamente la consecución de los objetivos de nuestra empresa con objeto de impulsar la mejora continua.

Cada año, la Dirección revisará la presente Política de Calidad y Medio Ambiente, haciendo constar en el informe de revisión del sistema los cambios producidos y su adecuación a la organización.

Para llevar a buen término esta Política, la Dirección de COMPIN FERROVIARIA, S.L. se compromete a cumplir los requisitos de las normas internacionales UNE-EN-ISO 9001:2015 y UNE-EN ISO 14001: 2015 que le sean de aplicación. La dirección de la organización asume personalmente los compromisos aquí expresados y se compromete a asegurar que dicha política es conocida, entendida y aplicada por todas las personas que forman parte de la organización, así como por las partes interesadas pertinentes.

Puede consultar el documento clicando en este enlace ISO14000

0 0 Continuez à Lire →

Innotrans 2018; thank you for your visit!

The international trade fair for innovation in rail transport, INNOTRANS, was held in Berlin just a few days ago.

It was a record breaking event in many ways.  2,950 exhibitors from 60 countries, along with 145,000 visitors made it a memorable show.   COMPIN-FAINSA also made history, as we attended for the first time as a united group!

Now as a leading European group in the supply of all interior fittings for public transportation vehicles, we proudly presented our large range of products … Passenger seats, toilet modules, ceilings, lighting, luggage-rack modules, partition walls and floors.

We were very happy to have truly remarkable feedback to our latest product designs.  Our INNOTRANS experience was even further improved by meeting up with old friends and of course, connecting with lots of new colleagues.

Today, we would like to extend our warmest thanks for your visit and the interest you have shown in our new & exciting group.  We look forward to working together in the future weeks.

0 0 Continuez à Lire →

A new success for COMPIN : The new generation of « RER » !

After more than 5 years of tendering, COMPIN has won the contract for the supply of passenger seats for the new RER NG to an the ALSTOM / BOMBARDIER Consortium.

This contract, ordered by SNCF, on behalf of Ile-de-France Mobilités (the former STIF) which represents one of the largest contracts in the history of rail in Europe, includes a first delivery of 71 trains with possible options that could reach 371 trains.

To date, the contracts won by the Consortium covers the supply of 255 trains that will run, from 2021, on the future lines E (130 new trains) and D (125 trains) of “Le Grand Paris”.

For the first tranche, COMPIN will produce nearly 37,000 seats, out of 193,000 in total. The range of seats includes fixed, tip-up and folding seats that will be supplied from our manufacturing sites of Evreux and Lodz. This project will ensure a workload for the company up to 2023 and beyond with the other tranches.

To win this contract, COMPIN demonstrated to the builders’ design teams its ability to develop an easy maintenance seat at a competitive price. Deliveries will begin in January 2019 with a production rate up to 6 trains per month.

0 0 Continuez à Lire →

FAINSA will install seats in 121 new urban buses sold by VDL Jonckheere to DeLijn

  • FAINSA will install seats in 121 new urban buses sold by VDL Jonckheere to DeLijn
  • This is a very important success and a clear evidence of the level of confidence from the most demanding customers. Our quality and service does count.

 

Our PUNT seat:

  • Our most versatile
  • More than 200,000 seats produced for the European market.
  • Flexibility: Modular design that is suitable for both Urban Inter-urban
  • Able to adapt to all needs: Punt truly is a platform product

 

0 0 Continuez à Lire →

Celebrate with us our newly born Compin Inc.

COMPIN Inc. will be our center of command for our growing rail market presence in the US, highlighting the recently awarded ALSTOM-AMTRAK project to supply passenger seats to 28 new-generation high-speed trains called AVELIA-Liberty from ALSTOM.  The trains will be ordered and managed by AMTRAK, for its North-East Corridor, serving the major cities of Washington DC, Baltimore, Philadelphia, New York and Boston.

From our brand-new company, COMPIN Inc will convince our customers about our ability to meet, among other aspects, their technological and comfort requirements and the requirements from the local content regulations BAA.

“This is an important breakthrough in our growth strategy and marks just the starting point that will help us drive our ambitious development plans for the US market” says Pierre Sainfort CEO of COMPIN group.

COMPIN Inc also wants to show our customers that we are aligned with their strategy to be present locally whilst at the same time ensure a global platform.” The message from our customers is loud and clear.  They need strong supplier partners that can match their ambitions to expand in a truly worldwide market” says Joan Gabriel Fernandez, Sales & Marketing Director of COMPIN-FAINSA.

The group today has more than 700 people worldwide and has sites in Spain, France, Poland, Bulgaria and now… North America.

0 0 Continuez à Lire →